13
8
When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the machine.
(For Windows
®
XP)
(For Windows
®
98/98SE/Me/2000)
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine. Brother
recommends that you connect the
machine directly to your computer.
9
Plug in the power cord and turn on the
machine.
0
For Windows
®
98/98SE/Me/
2000 Professional users, click Next.
Windows
®
XP users should wait for a while;
installation of the Brother drivers will start
automatically. The installation screens
appear one after another.
DO NOT try to cancel any of the
screens during this installation.
A
When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.
B
When the following screen appears, click
Finish and wait as the PC restarts
Windows
®
and continues the installation.
Continued...
Installing the Drivers & Software
Setting Up
the machine
Network
Administrators
Windows
®
Parallel
To Next Page
Loading...
