Troubleshooting
95
Machine Information B
Checking the Serial Number B
You can see the machine’s Serial Number on
the LCD.
a (DCP-8110DN and DCP-8155DN)
Press Menu, 6, 2.
(DCP-8110D)
Press Menu, 5, 2.
b Press Stop/Exit.
Reset functions B
The following reset functions are available:
1 Network
(for DCP-8110DN and DCP-8155DN)
You can reset the internal print server
back to its default factory settings such as
the password and IP address information.
2 All Settings
You can reset all the machine's settings
back to the factory default.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
Unplug the interface cable before you
choose Network or All Settings.
How to reset the machine B
a Press Menu, 1, 9.
b Press a or b to choose the reset function
you want to use.
Press OK.
c Do one of the following;
To reset the settings, press 1 and go
to step d.
To exit without making changes,
press 2 and go to step e.
d You will be asked to reboot the machine.
Do one of the following;
To reboot the machine press 1. The
machine will begin the reset.
To exit without rebooting the
machine, press 2. Go to step e.
If you do not reboot your machine, the
reset will not complete and your settings
will remain unchanged.
e Press Stop/Exit.
You can also reset the Network settings
by pressing Menu, 5, 0. (for DCP-8110DN
and DCP-8155DN)
To Next Page
Loading...
Need help?
General
