5-20
Confidential
Detailed description
Auto Skip Setting to skip at back end/tip of
paper
On/Off On
Left Margin Left margin setting 0 to 145 (columns) 0 (column)
Right Margin Right margin setting 10 to 155 (columns) 80 (columns)
Top Margin Top margin setting 0 to 2.00 (inches) 0.5 (inches)
Bottom Margin Bottom margin setting 0 to 2.00 (inches) 0.5 (inches)
Lines Setting of text lines per page 5 to 128 (lines) 60 (lines)
Error Print Error Print setting in the event of
PostScript error
On/Off On
LCD Detail description
Manual Feed Valid for printing from the computer, or for printing NetWorkConfig,
TestPrint, Fontlist, or Configuration from the panel. When the tray is selected
on the computer, the setting on the computer supersedes the setting on the
LCD.
Resolution Valid for printing from the computer. When the resolution is set on the
computer, the setting on the computer supersedes the setting on the LCD.
Toner Save Valid for all types of printing except copy, and the Function Menu setting can
also be changed. When Toner Save is set on the computer, the setting on
the computer supersedes the setting on the LCD.
Density Valid for printing from the computer, or for printing NetWorkConfig,
TestPrint, FontList, or Configuration from the panel. Linked with the Toner
Save setting, and the density is determined based on both settings. When
the density is set on the computer, the setting on the computer supersedes
the setting on the LCD.
JB-Can Time Sets the time until the host timeout is triggered when a job is cancelled. The
setting unit is on the second time scale.
Sleep Time Sets the time until the sleep mode is entered. The Function Menu setting can
also be changed.
Page Protection Sets the page memory to be secured for data processing before printing in
the computer. As this is a setting in the PCL-Core, this does not affect the
memory management of the machine.
Emulation Changes the print language. The Function Menu setting becomes valid.
When the data contains the ENTER LANGUAGE setting, this setting
supersedes the setting on the LCD.
Auto I/F Time Changes the interface open time. This setting becomes valid when PC-Print
is instructed, and becomes invalid when PC-Scan or Remote-SetUp is
instructed.
Media Type Valid for printing from the computer. When the type of paper is set on the
computer, the setting on the computer supersedes the setting on the LCD.
The default varies depending on the country setting. "Thin" is the default for
China and "Plain" is the default for other countries.
Paper Size Changes the image development area. Sets the drawing size for PC-Print,
instead of the setting for Paper Size in the menu. When the paper size is set
on the computer, the setting on the computer supersedes the setting on the
LCD. The default varies depending on the country setting. "Letter" is the
default for the US and Canada and "A4" is the default for other countries.
Copies Valid for printing from the computer. When the number of copies is set on
the computer, the setting on the computer supersedes the setting on the
LCD.
LCD Description Set value Default
To Next Page
Loading...
Need help?
General
Weight and Dimensions
