2-21
Confidential
Error
codes
Problem
Refer
to:
Error
codes
Problem
Refer
to:
9000
When printing from the MP tray,
the size of paper set in the MP
tray does not match the size
specified by the driver.
2-48 A000
Image processing cannot be completed
correctly because the number of pixels
required for image processing is
insufficient in the scanned data for the
second side of the document.
2-53
9100
When printing from paper tray 1,
the size of paper set in paper
tray 1 does not match the size
specified by the driver.
2-48 A100
The front cover sensor detected
that the front cover was open.
2-53
9200
When printing from paper tray 2,
the size of paper set in paper
tray 2 does not match the size
specified by the driver.
2-48 A200
The first side document scanning
position sensor detected that the
document length was 90 cm or
more while scanning the document.
2-54
9300
When printing from the MP tray,
the MP paper empty sensor
detected that there was no paper
set in the MP tray.
2-49 A300
The first side document scanning
position sensor has not detected the top
of the document even after the document
has been fed for the specified distance.
2-54
9400
When printing from paper tray 1,
the T1 paper feed sensor
detected that there was no paper
set in paper tray 1.
2-49 A400
The ADF cover sensor detected
that the ADF cover was open.
2-55
9500
When printing from paper tray 2,
the T2 paper feed sensor
detected that there was no paper
set in paper tray 2.
2-50 A500
When scanning the fax, white or
black correction data for the first
side CIS was not within the
correct range.
2-55
9600
When printing with the tray designation
set to AUTO, the MP paper empty
sensor, T1 paper feed sensor and T2
paper feed sensor all detected that
there was no paper set in the MP tray,
paper tray 1 and paper tray 2.
2-50 A600
Although operation was retried
due to error A500 that occurred
while scanning the fax, white or
black correction data for the first
side CIS was not within the
correct range.
2-55
9700
When printing from paper tray 1,
a paper size not supported for
paper tray 1 was specified from
the driver.
2-51 A700
Color parameter in the ROM
does not match the first side CIS.
2-56
9800
When printing from paper tray 2,
a paper size not supported for
paper tray 2 was specified from
the driver.
2-51 A800
An error was detected in the
color parameter in the ROM
during image processing.
2-56
9900
A paper size not supported for
duplex printing was specified
from the driver.
2-51 A900
A scanning error occurred while
scanning the image.
2-56
9A00
There is no paper set in the MP
tray while feeding from the
Manual is fixed.
2-52
AA00 An unidentified error occurred. 2-56
9B00 An unidentified error occurred. 2-52 AB00 An unidentified error occurred. 2-56
9C00 An unidentified error occurred. 2-52 AC00
When scanning the fax, white or
black correction data for the
second side CIS was not within
the correct range.
2-57
9D00 An unidentified error occurred. 2-52 AD00
Image processing cannot be completed
correctly because the number of pixels
required for image processing is
insufficient in the scanned data for the
front side of the document.
2-57
9E00
9F00
An unidentified error occurred. 2-52 AE00 An unidentified error occurred. 2-57
9F01
The T1 paper feed sensor detected
that paper has run out during
faxing or printing a list or report.
2-52 AF00
Home position is still being detected
even after the first side CIS for the
document scanner unit was moved.
2-57
To Next Page
Loading...
Need help?
General
Weight and Dimensions
