14
Cleaning the paper feed
rollers A
If the paper feed rollers are stained with ink, it
may cause paper feed problems.
a Unplug the machine from the electrical
socket. Pull the paper tray (1)
completely out of the machine.
If the paper support flap is open, close it,
and then close the paper support.
b Clean the Paper Feed Rollers (1) with a
soft lint-free cloth slightly moistened with
water, using a side-to-side motion.
After cleaning, wipe the rollers with a
dry, soft lint-free cloth to remove all
moisture.
c Put the paper tray firmly back in the
machine.
d Re-connect the power cord.
Do not use the machine again until the
rollers are completely dry. Using the
machine before the rollers are dry may
cause paper feed problems.
Cleaning the paper pick-up
rollers A
a Unplug the machine from the electrical
socket.
b Pull the paper tray completely out of the
machine.
If the machine has been feeding multiple
pages when there are only a few sheets of
paper left in the tray, clean the Base
Pad (1) with a soft lint-free cloth slightly
moistened with water.
After cleaning, wipe the pad with a dry,
soft lint-free cloth to remove all moisture.
1
To Next Page
Loading...
