Brother DCP-J172W

Settings and features tables
67
C
(Settings) (continued) C
Network
(Continued)
WLAN Enable ——On
Off*
Lets you use the
wireless network
connection.
See .
Network Reset ——Yes
No
Restores all
network settings
back to the
factory default.
Level1 Level2 Level3 Options Descriptions Page
Print Reports User Settings — — Prints these lists and
reports.
See .
Network Config ——
WLAN Report ——
Machine Info. Serial No. — — Lets you check the serial
number of your machine.
61
Version — — Lets you check the
firmware version of your
machine.
61
Initial Setup Date & Time — — Sets the date and time in
your machine.
40
Reset Machine Reset Yes
No
Resets all the machine’s
settings that you have
changed, such as the
Date and Time.
61
Network Yes
No
Resets the print server
back to its factory default
settings, such as the
password and IP address
information.
All Settings Yes
No
Resets all the machine’s
settings back to the
factory default.
Local Language
(depending on
your country)
— (Choose the
language you
want to use)
Allows you to change the
Touchscreen language
for your country.
See .
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
Level1 Level2 Level3 Level4 Options Descriptions Page
See Software and Network User’s Guide.
Go to the Brother Solutions Center to download Web Connect Guide at http://solutions.brother.com/
.
The factory settings are shown in Bold with an asterisk.