Brother DCP-J562DW - Page 298

Home > Fax > Telephone Services and External Devices > Caller ID > Set Caller ID to On
Set Caller ID to On
Related Models: MFC-J480DW/MFC-J680DW/MFC-J880DW
This feature is available only in the U.K. and Ireland.
If you subscribe to the Caller ID service on your phone line, set Caller ID to On to display the caller's telephone
number on the LCD as the telephone rings.
>> MFC-J480DW
>> MFC-J680DW/MFC-J880DW
MFC-J480DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Miscellaneous]. Press OK.
c. Select [Caller ID]. Press OK.
d. Select [On]. Press OK.
3. Press Stop/Exit.
MFC-J680DW/MFC-J880DW
1. Press [Settings] > [All Settings] > [Fax] > [Miscellaneous] > [Caller ID].
2. Press [On].
3. Press .
Related Information
• Caller ID
292