Brother DCP-J925DW - Page 40

Chapter 5
32
e Press to Media.
f Do one of the following:
 To change the quality, press d or c to
display Quality.
Press Quality and choose
Color 100 dpi,
Color 200 dpi,
Color 300 dpi,
Color 600 dpi, B/W 100 dpi,
B/W 200 dpi or B/W 300 dpi.
 To change the file type, press d or c
to display File Type.
Press File Type and choose PDF,
JPEG or TIFF.
 If you want to change the file name,
press d or c to display File Name.
Press File Name and enter the file
name.
You can only change the first
6 characters.
Press OK.
 To start scanning without changing
additional settings, go to step g.
Note
• If you chose colour in the resolution
setting, you cannot choose the file type
TIFF.
• If you chose monochrome in the resolution
setting, you cannot choose the file type
JPEG.
g Press Mono Start or Colour Start.
Note
You can place multiple documents on the
scanner glass and scan them as separate
files. (uuAdvanced User’s Guide: Auto
Crop)