Home > Fax > Receive a Fax > Remote Fax Retrieval > Set a Remote Access Code
Set a Remote Access Code
Related Models: MFC-L5700DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/
MFC-L6800DW
Set a Remote Access Code to access and control your Brother machine even when you are away from it.
Before you can use the remote access and retrieval features, you must set up your own code. The factory default
code is the inactive code (---*).
1. Press [Settings] > [All Settings] > [Fax] > [Remote Access].
2. Enter a three-digit code using the numbers [0] to [9], [*] or [#] using the LCD (the preset '*' cannot be
changed), and then press [OK].
• DO NOT use the same code used for your Fax Receive Code (*51) or Telephone Answer Code (#51).
• To make your code inactive, press and hold to restore the inactive setting (---*), and then press
[OK].
3. Press .
Related Information
• Remote Fax Retrieval
253
To Next Page
Loading...
Need help?
General
Weight and Dimensions
