EasyManuals Logo

Brother DCP-L5600DN User Manual

Brother DCP-L5600DN
724 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #352 background imageLoading...
Page #352 background image
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
Configure Your Machine for a Wireless Network Using the Machine's
Control Panel Setup Wizard
Related Models: MFC-L5700DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/
MFC-L6800DW
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
Network Name (SSID)
Network Key
For example:
Network Name (SSID)
HELLO
Network Key
12345
Your access point/router may support the use of multiple WEP keys, however your Brother machine
supports the use of the first WEP key only.
If you need assistance during setup and want to contact Brother Customer Service, make sure you
have your SSID (Network Name) and Network Key ready. We cannot assist you in locating this
information.
If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
How can I find this information?
a. Check the documentation provided with your wireless access point/router.
b. The initial SSID could be the manufacturer's name or the model name.
c. If you do not know the security information, please consult the router manufacturer, your system
administrator, or your Interner provider.
2. On your Brother machine's LCD, press [ ] [Settings] > [All Settings] > [Network] > [WLAN] >
[Setup Wizard].
3. When [Enable WLAN?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs.
If a list of SSIDs is displayed, swipe up or down or press a or b to display the SSID to which you want to
connect, and then press the SSID.
5. Press [OK].
6. Do one of the following:
If you are using an authentication and encryption method that requires a Network Key, enter the Network
Key you wrote down in the first step.
When you have entered all the characters, press [OK].
If your authentication method is Open System and your encryption mode is None, go to the next step.
345

Table of Contents

Other manuals for Brother DCP-L5600DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-L5600DN and is the answer not in the manual?

Brother DCP-L5600DN Specifications

General IconGeneral
Typeall in one
Colorblack/gray, multi
Touch Screenyes
Display Size3.7 inches
Tray Capacity50
Output Tray Capacity150 sheets
Automatic Document Feeder Capacity70 sheets
Paper Sizeansi a, legal, executive, a4, a5, a6, folio
Paper Handlingletter, legal, executive, a4, a5, a6, envelopes, custom sizes (3.0-8.5" (w), 5.0-14" (l))
Paper Weight60 grams per square meter
Printing Methodmonochromatic
Color Print Speed0 pages per minute
Mono Print Speed42 pages per minute
First Page Print Time7 seconds
Print Resolution Monoup to 1200 x 1200
Two-Sided Printingyes
Maximum Number of Pages Per Monthup to 50, 000
Reduction and Enlargementno
Photo Printingno
Scanner Typeflatbed
Scan Resolutionup to 1200 x 1200
Duplex Scanyes
Max Copies99
Copier Resolution Monoup to 1200 x 600
Fax Functionno
Cartridgesbrother tn820, brother tn850
Number Of Cartridges1
Internal Memoryyes
Memory Cardno
Networkwired
Connectivityusb 2.0, ethernet
Mobile Devices Connectionno
Weight and Dimensions IconWeight and Dimensions
Depth16.8 inches
Height16.8 inches
Width19.5 inches
Net Weight37.7 pounds

Related product manuals