EasyManuals Logo

Brother DCP-L5600DN User Manual

Brother DCP-L5600DN
724 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #354 background imageLoading...
Page #354 background image
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
Configure Your Machine for a Wireless Network When the SSID Is Not
Broadcast
Related Models: MFC-L5700DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/
MFC-L6800DW
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings.
Network Name (SSID)
Communication Mode Authentication Method Encryption Mode Network Key
Infrastructure Open System NONE -
WEP
Shared Key WEP
WPA/WPA2-PSK AES
TKIP
(TKIP is supported for
WPA-PSK only.)
For example:
Network Name (SSID)
HELLO
Communication Mode Authentication Method Encryption Mode Network Key
Infrastructure WPA2-PSK AES 12345678
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
2. Press [ ] [Settings] > [All Settings] > [Network] > [WLAN] > [Setup Wizard].
3. When [Enable WLAN?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs. Swipe up or down or press a
or b to display [<New SSID>]. Press [<New SSID>], and then press [OK].
5. Enter the SSID name, and then press [OK].
6. Press [Infrastructure] when instructed.
7. Select the Authentication Method.
8. Do one of the following:
If you selected the [Open System] option, press the Encryption type [None] or [WEP].
If you selected the [WEP] option for Encryption type, select and enter the WEP key, and then press [OK].
If you selected the [Shared Key] option, select and enter the WEP key, and then press [OK].
If you selected the [WPA/WPA2-PSK] option, press the Encryption type [TKIP+AES] or [AES].
Enter the WPA key, and then press [OK].
347

Table of Contents

Other manuals for Brother DCP-L5600DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-L5600DN and is the answer not in the manual?

Brother DCP-L5600DN Specifications

General IconGeneral
Typeall in one
Colorblack/gray, multi
Touch Screenyes
Display Size3.7 inches
Tray Capacity50
Output Tray Capacity150 sheets
Automatic Document Feeder Capacity70 sheets
Paper Sizeansi a, legal, executive, a4, a5, a6, folio
Paper Handlingletter, legal, executive, a4, a5, a6, envelopes, custom sizes (3.0-8.5" (w), 5.0-14" (l))
Paper Weight60 grams per square meter
Printing Methodmonochromatic
Color Print Speed0 pages per minute
Mono Print Speed42 pages per minute
First Page Print Time7 seconds
Print Resolution Monoup to 1200 x 1200
Two-Sided Printingyes
Maximum Number of Pages Per Monthup to 50, 000
Reduction and Enlargementno
Photo Printingno
Scanner Typeflatbed
Scan Resolutionup to 1200 x 1200
Duplex Scanyes
Max Copies99
Copier Resolution Monoup to 1200 x 600
Fax Functionno
Cartridgesbrother tn820, brother tn850
Number Of Cartridges1
Internal Memoryyes
Memory Cardno
Networkwired
Connectivityusb 2.0, ethernet
Mobile Devices Connectionno
Weight and Dimensions IconWeight and Dimensions
Depth16.8 inches
Height16.8 inches
Width19.5 inches
Net Weight37.7 pounds

Related product manuals