Chapter 2
14
b Put envelopes in the paper tray with the
address side down. If the envelope flaps
are on the long edge, load the
envelopes in the tray with the flap on the
left, as shown in the illustration. Gently
press and slide the paper width
guides (1) and paper length guide (2) to
fit the size of the envelopes.
c Select Reverse Print (Windows
®
) or
Reverse page orientation (Macintosh)
in the printer driver’s dialog box, and
then adjust the size and margins in your
application.
(See Software and Network User’s
Guide.)
If you have problems printing on
envelopes with the flap on the short edge,
try the following:
2
a Open the envelope flap.
b Put the envelope into the paper tray with
the address side down and the flap
positioned as shown in the illustration.
c Select Reverse Print (Windows
®
) or
Reverse page orientation (Macintosh)
in the printer driver’s dialog box, and
then adjust the size and margins in your
application.
(See Software and Network User’s
Guide.)
1
2
To Next Page
Loading...
