33
A
A
Refilling the ink tanks A
When the machine detects it is running out of
ink, the machine will display a message.
The LCD will show which ink tank is low or
needs refilling. Be sure to follow the LCD
prompts to refill the ink tanks in the correct
order.
You can assess the actual amount of
remaining ink visually by looking through the
see-through cover (1) of the ink tank.
If the remaining ink level is at or below the
lower line (2) under the triangle mark, refill
the ink tank.
To prevent print head assembly from drying
out and getting damaged, it is necessary to
keep the ink above the lower line in the tank.
Refill the ink tank when the remaining ink
level is at or below the lower line.
If ink gets in your eyes, wash it out with
water at once and call a doctor if you are
concerned.
Brother multifunction machines are
designed to work with ink of a particular
specification and will work to a level of
optimum performance and reliability when
used with Brother Original ink. Brother
cannot guarantee this optimum
performance and reliability if ink of other
specifications is used. Brother does not
therefore recommend the use of ink from
other sources. Damage to the product
caused by the use of consumables
manufactured by third parties may not be
covered by the product warranty. Please
refer to the terms of the product warranty.
a Open the ink tank cover (3).
Routine maintenance A
To Next Page
Loading...
