Brother DCP-T500W - Specifications; General Specifications

70
0.Initial Setup 1.Date&Time — — Sets the date and time in
your machine.
39
2.LCD Contrast — Light
Dark*
Adjusts the contrast of the
LCD.
See .
3.Sleep Mode — 1 Min
2 Mins
3 Mins
5 Mins*
10 Mins
30 Mins
60 Mins
You can choose how long
the machine will remain
idle before it goes into
Sleep mode.
4.Reset
1.Machine Reset a Reset b Exit Resets all the machine’s
settings that you have
changed, such as the
Date and Time.
63
2.Network
(DCP-T500W
and
DCP-T700W)
a Reset b Exit Resets the print server
back to the factory
defaults, such as the
password and IP address
information.
2.All Settings
(DCP-T300)
3.All Settings
(DCP-T500W
and
DCP-T700W)
a Reset b Exit Resets all the machine’s
settings back to the
factory default.
5.Auto Power Off — Off
1hour*
2hours
4hours
8hours
This feature will turn off
the machine after it has
been in Sleep Mode for
the number of hours you
set. When set to Off, the
machine will not power off
automatically.
9
0.Local Language
(depending on
your country)
— (Choose the
language you
want to use)
Allows you to change the
LCD language for your
country.
See .
Level1 Level2 Level3 Options Descriptions Page
See Advanced User’s Guide.
The default settings are shown in Bold with an asterisk.