4. To change the fax settings, press a or b to select the setting you want to change, and then press OK.
5. When finished, press Mono Start.
6. Do one of the following:
• If you are using the ADF, the machine starts scanning and sending the document.
• If you are using the scanner glass and pressed Mono Start, the machine starts scanning the first page.
Go to the next step.
7. When the LCD displays [Next page?], do one of the following:
• Press c to scan another page. Place the next page on the scanner glass, and then press c. The machine
starts scanning the page.
Repeat this step for each additional page.
• Press d to send the fax when finished scanning pages. The machine starts sending the document.
Related Information
• Send a Fax
Related Topics:
• Fax Options
145
To Next Page
Loading...
