2. Press a or b to make your selections:
a. Select [Print Head Cleaning]. Press OK.
b. Select [Black only], [Colour only], or [All]. Press OK.
c. Select [Normal], [Strong], or [Strongest]. Press OK.
3. Press c.
The machine cleans the print head.
NOTE
If you clean the print head several times and the print has not improved, try the Special cleaning method.
1. Make sure all ink tanks are filled more than halfway, as this method consumes a large amount of ink.
2. Press
(Ink).
3. Press a or b to select [Print Head Cleaning]. Press OK.
4. Press Settings and OK simultaneously.
The machine starts cleaning.
• Use the Special cleaning method only if you previously cleaned the print head several times and the
print quality did not improve.
• If you start the cleaning with low ink amount, it may cause damage to the machine. Check each ink tank
level before starting the cleaning and refill each ink tank as necessary.
• You can also clean the print head from your computer.
Related Information
• Clean Your Brother Machine
Related Topics:
• Paper Handling and Printing Problems
• Clean the Print Head from Your Computer (Windows)
• Clean the Print Head Using Web Based Management
408
To Next Page
Loading...
