Brother DCP-T520W - Page 464

Level 1 Level 2 Level 3 Descriptions
DCP-T720DW/
DCP-T725DW)
Paper Size
(DCP-T520W/
DCP-T525W/
DCP-T720DW/
DCP-T725DW)
- - Set the size of paper in the paper tray.
Check Paper
(DCP-T520W/
DCP-T525W/
DCP-T720DW/
DCP-T725DW)
- - Check the paper type and paper size when
you pull the tray out of the machine.
Ecology Sleep Time
- Select how long the machine must be idle
before it goes into Sleep Mode.
Quiet Mode
- Decrease printing noise.
Auto Power Off
- Select how long the machine must wait
before it automatically turns itself off after
entering Sleep Mode.
When set to Off, the machine does not
power off automatically.
LCD Contrast
- - Adjusts the contrast of the LCD.
Menu > [Copy]
Level 1
Descriptions
Density
Adjust the density.
Quality
Select the Copy resolution for your document type.
Menu > [Network]
Level 1
Level 2 Level 3 Descriptions
Wired LAN
(DCP-T820DW/
DCP-T825DW)
TCP/IP BOOT Method
Select the Boot method that best suits
your needs.
IP Address
(DCP-T820DW/
DCP-T825DW)
Enter the IP address.
Subnet Mask
(DCP-T820DW/
DCP-T825DW)
Enter the Subnet mask.
Gateway
(DCP-T820DW/
DCP-T825DW)
Enter the Gateway address.
Node Name
(DCP-T820DW/
DCP-T825DW)
Enter the Node name.
WINS Config
(DCP-T820DW/
DCP-T825DW)
Select the WINS configuration mode.
WINS Server
(DCP-T820DW/
DCP-T825DW)
Specify the IP address of the primary or
secondary WINS server.
458