4
i Push down on the cap of the ink tank to close it
tightly.
j Repeat steps c to i for the three other ink
tanks.
k Close the ink tank cover.
6
Load plain A4 paper
a Pull the paper tray completely out of the
machine.
b Open the output paper tray cover.
c Gently press and slide the paper width
guides a and then the paper length guide b to
fit the paper size.
Make sure that the triangular marks c on the
paper width guides a and paper length
guide b line up with the marks for the paper
size you are using.
d Fan the stack of paper well to avoid paper jams
and misfeeds.
DO NOT tip the product after the ink tanks are
filled. Doing so may cause ink spillage and
internal damage to the product.
The machine will prepare the ink tube system for
printing. This process will take approximately
seven minutes. Do not turn off the machine. We
recommend you perform the next step while
waiting.
Always make sure that the paper is not curled or
wrinkled.
To Next Page
Loading...
