GT-3 Series
(4) Print with the application's print menu. Wait for a while until the following preview window appears. Click
[ Save ] button.
<Important!>
Depending on the application, the image size, resolution and PC spec, it may take a few minutes to open the
Preview window after clicking “OK” or “Print”. Do not click “Print” or “OK” again.
A print data example with White data
(5) "Save As" dialog appears. Select where to save the data, enter the file name, select “GT Print File (*.ar3)” as
the file type, and then click “Save”.
The AR3 file is created and saved in the selected location.
To Next Page
Loading...
