GT-3 Series
4. Printing Directly from Applications
4-2-4. Settings for Adobe Illustrator
<Important!>
Set either one from “Brother GT-3 (for USB 2.0)”, “Brother GT-3 (for LAN)”, or "Brother GT-3 FileOutput" as
the default printer before you go on to the following steps, otherwise, an image may be printed incorrectly.
Check the print data by the preview by using "Brother GT-3 FileOutput".
GT-3 is an RGB printer. Make the print data in RGB Color mode to get the best Color accuracy. In CMYK color
mode artwork may be printed dark and unclear. Transforming it to RGB (“Document Color Mode” on “File”
menu) may improve the result, but black, yellow, and purple cannot be printed accurately. We recommend
you edit the artwork or use Color Processing (see "4-3-12. Selecting the Color Processing for increasing the
vividness").
Color settings:
(1) Select [ Edit ] > [ Color Settings ] menu. The Color Settings window appears.
(2) Make Color settings as follows, and then click “OK".
Advanced Mode: Check
Working Spaces: RGB: sRGB IEC61966-2.1
CMYK: U.S. Web Coated (SWOP) v2 / Europe ISO Coated FOGRA27
Conversion Options/ Intent: Relative Colorimetric (No settings for CS4/C5)
Illustrator CS2
To Next Page
Loading...
