Brother GT-341 - Page 143

GT-3 Series
7. Troubleshooting
133
Problem
Cause
Solution
GT-3 does not turn on.
There is no power.
Check the power cable connections.
The Front Cover is open or
not closed properly.
Close the Front Cover properly.
An error occurred just after
turning on GT-3.
An error occurred.
Check the error code with "7-4. Error Messages"
and restart GT-3. If the error is not cleared, please
contact Brother or your dealer.
GT-3 cannot read data from
USB flash drive.
No USB flash drive is
inserted in the slot, or it is
not inserted properly.
Insert USB flash drive properly.
ARP files are saved.
GT-3 cannot print GT-541/GT-782 print data.
Make AR3 print data with Brother GT-3 File
Output printer driver.
That USB flash drive does
not match the specification.
Use a USB flash drive that is FAT32 formatted
and its capacity is under 32 GB
The USB flash drive has
poor quality.
Confirm that USB flash drive with your PC.
Cannot do Uni-Directional /
Bi-Directional Printing.
The setting between the
Printer Driver and the
Printer does not match.
The printer setting is prior to the Printer Driver.
Uni-Directional setting in the Printer Driver is only
available when the printer setting is [Auto].