Brother GT-341 - Page 170

GT-3 Series
7. Troubleshooting
160
Error
code
Message Meaning Solution
1200
Exchange Maintenance
Parts
Needs to exchange the
Maintenance Parts and to clean
the printer.
Exchange the Maintenance Parts and clean the
inside of the printer. See "6-1. Replacing
Consumables".
1201
Exchange Maintenance
Parts
1210 Exhaust Fan Stop
The Fan to exhaust ink mist is
stopped.
**
1220 Exchange Filter K K/C Filter needs to be replaced.
Replace with the new K/C Filter on the K Print
Head.
1221 Exchange Filter M M/Y Filter needs to be replaced.
Replace with the new M/Y Filter on the M Print
Head.
1222 Exchange Filter C K/C Filter needs to be replaced. Replace with th
e new K/C Filter on the C Print
Head.
1223 Exchange Filter Y M/Y Filter needs to be replaced. Replace with the new M/Y Filter on the Y
Print
Head.
2000 NO INK Black Black Ink Cartridge is not installed. Install a Black Ink Cartridge.
2001 NO INK Magenta
Magenta Ink Cartridge is not
installed.
Install a Magenta Ink Cartridge.
2002 NO INK Cyan Cyan Ink Cartridge is not installed. Install a Cyan Ink Cartridge.
2003 NO INK Yellow
Yellow Ink Cartridge is not
installed.
Install a Yellow Ink Cartridge.
2004 NO INK White-1
White 1 Ink Cartridge is not
installed.
Install a White Ink Cartridge.
2005 NO INK White-2
White 2 Ink Cartridge is not
installed.
2006 NO INK White-3
White 3 Ink Cartridge is not
installed.
2007 NO INK White-4
White 4 Ink Cartridge is not
installed.
2020 EMPTY Black Black Ink Cartridge ran out of ink. Replace to a new Black Cartridge.
2021 EMPTY Magenta
Magenta Ink Cartridge ran out of
ink.
Replace to a new Magenta Cartridge.
2022 EMPTY Cyan Cyan Ink Cartridge ran out of ink. Replace to a new Cyan Cartridge.
2023 EMPTY Yellow Yellow Ink Cartridge ran out of ink. Replace to a new Yellow Cartridge.
2024 EMPTY White-1
White 1 Ink Cartridge ran out of
ink.
Replace to a new White Cartridge.
2025 EMPTY White-2
White 2 Ink Cartridge ran out of
ink.
2026 EMPTY White-3
White 3 Ink Cartridge ran out of
ink.
2027 EMPTY White-4
White 4 Ink Cartridge ran out of
ink.
2041 No Wiper Cleaner (CMYK)
The Wiper Cleaner for CMYK is
not installed.
Install the Wiper Cleaner to the CMYK side.
2042 No Wiper Cleaner (White)
The Wiper Cleaner or White is not
installed.
Install the Wiper Cleaner to the White side
2050 Temp Low
The ambient temperature is under
the operative temperature rage.
Raise the room temperature.
2051 Temp High
The ambient temperature is over
operative temperature rage.
Drop the room temperature.
2070
O
bstacle on the Platen
The Clearance Sensor detected
an obstacle on the Platen (or the
media) in loading the Platen.
Remove the obstacle, flat the platen surface and
then press OK Button.
2100
USB flash drive Not
Ready
USB flash drive is not properly
mounted.
Re-mount the USB flash drive. Confirm the spec
and type of the USB flash drive. See "7-1. Solving
Printer Problems".