Brother GT-341 - Page 172

GT-3 Series
7. Troubleshooting
162
Error
code
Message Meaning Solution
4100
USB flash drive Access
Error
The file cannot be opened.
Check the contents in the USB flash drive.
Re-mount the USB flash drive and retry the
operation.
Or reboot GT-3. See " 7-1. Solving Printer
Problems".
4101 No file can be created.
4102 The file cannot be closed.
4103 Failure in searching file
4104 Failure in reading file
4105 Failure in writing file
4106 Illegal file data
4107 Illegal file size
4108 Failure to get the file size
4109
No Files
Failure in searching file
Check the contents in the USB flash drive.
Or reboot GT-3. See " 7-1. Solving Printer
Problems".
4110 No file is found.
4200
Message data Error
Error in selected language data for
the Display.
Update firmware again from the beginning if you
find this error after you cancel the firmware update.
Contact your dealer or Brother.
4201
4202
4300
Font data Error Error in font data for the Display. 4301
4302
4400
Test print data Error
Error in the Print Data in the menu
for Test Print Data
4401
4402
4500 Machine Error Cannot start the Network Interface
Press OK Button to recover. Check the network
and contact your Network Administrator. Contact
your dealer or Brother with mechanical damage.
4501 Machine Error
Detects Illegal IP address and/or
Subnet mask.
Press OK Button to recover. Assign the proper IP
address and Subnet mask with GT-3 Maintenance
Tool.
4502 Machine Error Cannot assign Network Interface
Press OK Button to recover. Check the network
and contact your Network Administrator. Contact
your dealer or Brother with mechanical damage.
4503 Machine Error Detects Illegal Default Gateway
Press OK Button to recover. Assign the proper IP
address and Subnet mask with GT-3 Maintenance
Tool.
5001
Machine Error
Communication error inside the
firmware.
**
5002
5020
5021
5090
Machine Error
Caps were not open. **
5091 Caps were not closed. **