Brother GT-341 - Page 175

GT-3 Series
7. Troubleshooting
165
Error
code
Message Meaning Solution
5491 Machine Error Internal Error of Maintenance Unit **
6004 Clearance Sensor Failure Malfunction of Clearance Sensor **
6010
Machine Error
Failure of writing to EEPROM in
Main PCB
**
6011
Machine Error
Failure of deleting Flash ROM in
Main PCB
**
6012
Machine Error
Failure of writing Flash ROM in
Main PCB
**
6020
Machine Error
Illegal Real Time Clock **
6021 Fail: No Battery Dead Battery of Real Time Clock **
6031 Fail: Panel Button
Platen Button may be
malfunctioning.
Check it something is on the Control Panel and
pushing the button.
Contact your dealer or Brother.
6032 Fail: Panel Button
Print Button may be
malfunctioning.
6033 Fail: Panel Button
Stop Button may be
malfunctioning.
6034 Fail: Panel Button
Back Button may be
malfunctioning.
6035 Fail: Panel Button OK Button may be malfunctioning.
6036 Fail: Panel Button
Down Button may be
malfunctioning.
6037 Fail: Panel Button Up Button may be malfunctioning.
6038 Fail: Panel Button
Head Cleaning Button may be
malfunctioning.
6040 Machine Error Could not detect Head Memory **
6100
Machine Error
Adjust CR
Illegal Carriage Move (Speed
Error)
Clean GT-3 by referring ""6-1-7. Cleaning the
Encoder Strip" and "6-1-6. Cleaning the inside of
the printer and restart". Contact your dealer or
Brother if the cleaning has no effect.
6101 Machine Error Carriage move did not complete.
Check whether the media is jamming in the
Carriage.
Clean GT-3 by referring ""6-1-7. Cleaning the
Encoder Strip" and "6-1-6. Cleaning the inside of
the printer and restart". Contact your dealer or
Brother if the cleaning has no effect.
6102
Machine Error
Adjust CR
Failure in stopping the Carriage at
the proper position
6103
6104 Machine Error
CR time-out of the Carriage during
printing
**
6105 Machine Error
CR time-out of the Carriage during
flashing
**
6106
Machine Error
Malfunction of Origin Sensor in CR
returning to the origin
**
6107
Machine Error
6108 Machine Error
Illegal termination of CR returning
to the origin
**
6109 Machine Error
Illegal adjustment of CR Speed
**
6110 Machine Error **
6111
Machine Error
**
6112
Machine Error
**
6113
Machine Error
**
6114
Machine Error
Abnormal decrease of CR Speed **