Brother GT-341 - Page 70

GT-3 Series
4. Printing Directly from Applications
60
Convert to Bitmap:
(1) Select [ Bitmaps ] > [ Convert to Bitmap... ] menu.
(2) CorelDRAW 10/11/12: Make sure that "Color" is RGB and "Apply ICC Profile" is OFF. 200 - 400 dpi is
enough for solid clipart.
CorelDRAW X3/X4: Make sure that "Color mode" is RGB and "Apply ICC Profile" is ON.
CorelDRAW X5: Make sure that "Color mode" as RGB.
CorelDRAW 10/11/12
CorelDRAW X3/X4
If you print the image with White Ink
then make the Anti-aliasing OFF.
CorelDRAW X5
If you print the image with White Ink
then make the Anti-aliasing OFF.