Brother GT-341 - Page 96

GT-3 Series
4. Printing Directly from Applications
86
(6) The following dialog appears to save ARTR file. Input the file name (as "test.artr").
Step 4: Apply RGB-info PNG file to transparent-info ARTR file in printing.
(1) Open test_RGB.PNG" with Photoshop, made in (1) of Step 1.
(2) Microsoft Paint automatically changes the resolution of "test_RGB.PNG" as 72 dpi. Select [ Image ] >
[ Image Size ] and check off the [ Resample Image ] and change the resolution to the previous value that you
made memo in (2) of Step 1.
(3) Select [ File ] > [ Print ] and select Brother GT-3 FileOutput and print "test_RGB.PNG". Align the print position
exactly the same as the ARTR file in (2) of Step 3.. Select [ Page Setup ...] (some versions: Properties) and
open the Printer Driver settings.
(Continued on the next page)
Saved as "test.artr"
1. Check-OFF
2. apply the original resolution (e.g. 200)