3. Getting Started
GT-541
25
3-3-2. For Windows 2000 Users
<Before installing! > Start installing without connecting your printer to your PC.
<Note>
With Windows 2000, you need to log on as a user with administrative right for the installation.
(1) Turn on your PC.
(2) Close any applications opening.
(3) Insert the Install CD (included) to your PC.
If the following installer automatically opens, skip step (4) to (5) and go to step (6).
If not, go on to the next step to open the installer.
(4) Click “Run” on “Start” menu.
(5) Enter “(CD-ROM drive location):\GTSetup.exe”, and then click “OK”.
*The location of CD-ROM drive depends on your PC.
The installer opens.
To Next Page
Loading...
