3. Getting Started
GT-541
33
3-4-2. Adjusting the Speaker Volume
<Note> The adjusted volume is also applied to the error sound.
(1) Turn on your printer if it is off.
(2) Press the OK Button on your printer’s Control Panel.
The following display appears.
(3) Use the Up/Down Button to select “Speaker Volume”, and then press the OK Button.
The following display appears.
(4) Use the Up/Down Button to select your desired volume from 0 (silent) to 7, by listening to the
confirmation sound made when pressing the Up/Down Button, and then press the OK Button.
The volume is adjusted to your desired level.
To Next Page
Loading...
