Brother GT-541 - Page 49

5. Maintenance
GT-541
42
(15) Use the one side of wet Clean Applicator to clean the front side of the Wiper Blade.
(16) Use the other side of the wet Clean Applicator to clean the backside of the Wiper Blade.
(17) Wet other two Clean Applicators and use them to remove ink or dust from the Print Head Caps.
Use one side of the Clean Applicator to clean one Print Head Cap.
<Note>
Do not use the dry Clean Applicator; it cannot clean ink or dust, moreover, it may damage the Print
Head Caps.