Brother GT-541 - Page 51

5. Maintenance
GT-541
44
(2) Remove the sticker on the used Waste Ink Cartridge, and use it to seal the hole on it.
(3) Remove the new Waste Ink Cartridge from its package.
<Note> Save the package for the later use.
(4) Remove the used Waste Ink Cartridge from the Waste Cartridge Tray, and put it in the package, in
which the new Waste Ink Cartridge was.
(5) Install the new Waste Ink Cartridge in the Waste Cartridge Tray.
(6) Install the Waste Cartridge Tray.
The replacement of the Waste Ink Cartridge has been completed.
<Note> Dispose the used Waste Ink Cartridge in compliance with your local regulations.