7. Troubleshooting
GT-541
101
(14) Insert the Wiper Cleaner Cassette straight into your printer.
<Note>
Do not touch the Clearance Sensor (the bar above the Wiper Cleaner Cassette);
(15) Close the Front Cover, and then turn on your printer.
If your printer turns on without any problem, replacement of the Wiper Blade has been completed.
If there is problem ( such as abnormal noise or an error )then turn off your printer, and check if the
Wiper Blade, the Wiper Cleaner and the Wiper Cleaner Cassette are correctly installed.
To Next Page
Loading...
