Brother GT-541 - Printer Setup Adjustments

3. Getting Started
GT-541
26
3-4. Setting Up Your Printer
Adjust the display contrast and the speaker volume as required.
3-4-1. Adjusting the Display Contrast
(1) Press the OK Button on your printer’s Control Panel.
The following display appears.
(2) Use the Up/Down Button to highlight “LCD Contrast”, and then press the OK Button.
The following display appears.
(3) Use the Up/Down Button to select your desired contrast from 0 to 7, and then press the OK Button.
3-4-2. Adjusting the Speaker Volume
(1) Press the OK Button on your printer’s Control Panel.
The following display appears.
(2) Use the Up/Down Button to select “Speaker Volume”, and then press the OK Button.
The following display appears.
(3) Use the Up/Down Button to select your desired volume from 0 (silent) to 7, and then press the OK
Button.