Brother GT-541 - Entering the Job Comment; Selecting the Platen Size; Setting the Media Color; Increasing the Vividness of the Colors

4. Printing Directly from Applications
GT-541
44
4-3-1. Entering the Job Comment
You can enter a comment (max 17 characters) to display on your printer’s Control Panel. It is used
to advise the operator.
4-3-2. Selecting the Platen Size
Select the appropriate Platen size from the pull-down menu. When you use the Platen which
mismatches with print data, or use Baby Platen (7x8 inches, option) , make sure the location and
offset information.
4-3-3. Setting the Media Color
To reproduce the Color on a T-shirt, you need to specify the Color of T-shirt. Select "White", "Pink",
"Yellow", "Blue", or "Gray" from the pull-down menu are the available options.
4-3-4. Increasing the Vividness of the Colors
Use this function to increase the vividness of an image. Slide the “Vivid Processing” tab to select 0
(almost the same vividness as shown on the display), 1 (increases the vividness one level without
changing the tone; suitable for photo images), 2 (increases the vividness two levels; select this to
print photo images most vividly), 3 (increases the vividness three levels; suitable for illustrated
images), or 4 (increases the vividness four levels; also suitable for illustrated images).
The bigger the number is, the more vivid the image is printed. When the original artwork is i n
CMYK mode, Vivid Processing 3 (2-4) is recommended to increase the saturation.
<Note>
The Colors may be unexpectedly changed by Vivid Processing 3 or 4.
4-3-5. Setting Double Printing
Check the Double Printing to print an image clearer and sharper by widening the Color gamut.
This is recommended especially for black and white images.
<Note>
When you are using this function, you cannot select the “Ink Volume” or “Yellow / Black Printing”.