Brother GT-541 - Page 119

7. Troubleshooting
GT-541
109
Error
code
Message Meaning Solution
5100
BYSH:ILGL SIZE Y
Defect in the Platen information
from SH (y)
5101
BYSH:ILGL OFFSET
Defect in the scan print area from
SH
5102
Machine Error
Time-out of sending print data from
SH
**
5200
SHMN: Response TO
Time-out of waiting for the
Maintenance Unit response
5201
SHMN:ILGL RSP
Error in the Maintenance Unit
response format
**
5210
-
Received an error response from
the Maintenance Unit.
**
5211
MNT RSP Error: XX
Received an error response from
the Maintenance Unit while
purging.
5212
MNT RSP Error: XX
Received an error response from
the Maintenance Unit while
initializing.
5213
MNT RSP Error: XX
Received an error response from
the Maintenance Unit while
printing.
5214
MNT RSP Error: XX
Received an error response from
the Maintenance Unit while wiping.
5215
MNT RSP Error: XX
Received an error response from
the Maintenance Unit while
operating the Cap.
5216
MNT RSP Error: XX
Received an error response from
the Maintenance Unit while
initializing the Wiper Cleaner
Cartridge after mounting it.
5217
MNT RSP Error: XX
Received an error response from
the Maintenance Unit while
canceling purging.
**
5218
MNT RSP Error: XX
An overrun, framing error or parity
error has occurred.
**
5219
MNT ILGL VERSION
The Maintenance version is too
old.
**
5220
Error: RSP10
Received an error response from
the Maintenance Unit while
measuring negative pressure.
**
5221
MNT RSP Error: XX
Received an error response from
the Maintenance Unit while
updating the firmware.
**
5222
MNT RSP Error: XX
Received an error response from
the Maintenance Unit while
re-initializing after inserting the
Wiper Cleaner Cassette.
**
6000
Fail: PLTN Load Platen loading error
6001
Fail: PLTN Unload Platen unloading error
6002
Fail: PLTN LF Platen moving error
**