4. Printing Directly from Applications
GT-541
51
(4) Place the T-shirt, with its print side on the top of Platen and the other side underneath the Platen, as
shown below.
<Note>
Pay attention to the hems; neck, arm holes, tags, and the bottom.
The side edges may raise and hit the Print Head during printing operation. It is important to ensure
the t shirt surface is flat and smooth.
(7) Smooth the surface to remove wrinkles and threads with your hands. It is easier to smooth from the
center of the shirt outwards.
<Note>
If the surface of T-shirt is not smooth enough, the Obstruction Sensor may be activated
When placing a thick fabric such as a sweatshirt, keep its surface as flat as possible.
(8) Keep the sleeves and overflows on the T-shirt Tray to avoid jamming.
T-shirt Tray
Print Side
To Next Page
Loading...
