Brother HL-2030 - What kind of paper can I use?

11
Setting your printer as the default
printer
(For Windows
®
2000/XP users only)
1 Click Start and then Printers and Faxes.
2 Select the icon of the appropriate printer.
3 From the File menu, select Set as Default
printer.
The setup is now complete.
Connecting the printer to your PC
and installing the driver
1 Click Install Printer Driver on the Menu
screen.
2 Select the Parallel interface.
3 Turn off the printer power switch.
4 Connect the parallel interface cable to your
PC, and then connect it to your printer.
5 Read the license agreement carefully.
Then follow the on-screen instructions.
6 Click the Finish button.
7 Turn on the printer power switch.
The Setup is now complete.
For Parallel Interface Cable Users (HL-2040/2070N Users)
Setting Up
Your Printer
Windows
®
USB
Installing the Printer Driver
Windows
®
Parallel