Brother HL-2030 - For Network Interface Cable Users (HL-2070 N Users); For Mac os 9.1 to 9.2 Users

16
Installing the Driver
Connecting the printer to your Macintosh & installing the driver
1 Click Install Printer Driver on the Menu
screen.
2 Select the Network interface and follow the
on screen instructions.
Restart your Macintosh
®
.
3 Turn off the printer power switch.
4 Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
5 Turn on the printer power switch.
6 From the Go menu, select Applications.
7 Open the Utilities folder.
8 Double-click the Printer Setup Utility icon.
9 Click Add.
0 Make the following selection.
A Select Brother HL-2070N series, and then
click the Add button.
B From the Printer Setup Utility menu, select
Quit Printer Setup Utility.
The setup is now complete.
For Network Interface Cable Users (HL-2070N Users)
For Mac OS
®
X 10.2.4 or greater Users
Network User's Guide Chapter 6.
Step 2