17
Connecting the printer to your Macintosh & installing the driver
1 Turn off the printer power switch.
2 Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
3 Turn on the printer power switch.
4 Insert the CD-ROM into your CD-ROM
drive. Open the Mac OS 9 folder.
5 Open the language folder.
6 Double-click the Printer Driver Installer
icon to install the printer driver.
Follow the on-screen instructions.
7 From the Apple menu, Open the Chooser.
8 Click the Brother Laser (IP) icon, and then
select BRN_xxxxxx
*
. Click the Setup...
button.
* Where xxxxxx are the last six digits of
the Ethernet address.
9 Click the OK button.
Close the Chooser.
The setup is now complete.
For Mac OS
®
9.1 to 9.2 Users
Network User's Guide Chapter 6.
Macintosh
®
Network
Installing the Printer Driver
Setting Up
Your Printer
To Next Page
Loading...
