Control panel
36
4
Back cover is open
Close the back cover of the printer.
Paper jam
Clear the paper jam. See Paper jams and how to clear them on page 61. If the printer
does not start printing, press the Go button.
No paper fed manual feed slot
Put the paper in the manual feed slot. See Printing on plain paper, bond paper or
transparencies from the manual feed slot on page 10 or Printing on thick paper,
labels and envelopes from the manual feed slot on page 13.
Memory full
The printer memory is full and the printer cannot print full pages of a document. See
Solving print problems on page 72.
Print overrun
A print overrun occurred and the printer cannot print full pages of a document. See
Solving print problems on page 72.
Drum error
The corona wire needs to be cleaned. See Cleaning the corona wire on page 56.
If your LED's still shows the same error indication after you have cleaned the corona
wire, replace the drum unit with a new one. See Replacing the drum unit on page 49.
LED Printer status
To Next Page
Loading...
