Brother HL-2070N - Changing the Configuration Using a Web Browser

Network printing from Macintosh
®
6 - 2
6
5 Make the following selection.
6 Select Brother HL-2070N series and then click Add.
7 Click the printer, then click Make Default to set the printer as the default printer. The printer is now ready
to print.
Changing the configuration using a web browser
From a Macintosh
®
, the easiest way to change the printer or print server parameters is to use a web browser.
Simply connect to the printer using the format: http://ip_address where ip_address is the address of
the printer.
See Using the HTTP (web browser) and the TCP/IP protocol to change the print server settings on page 2-5.