Brother HL-2130 - Page 103

3-33
Confidential
(Top cover ASSY <except for HL-2130/2135W>)
(6) Remove the two Taptite bind B M4x12 screws.
(7) Release the four Hooks and two Ribs of the Top cover ASSY, and remove the Top cover
base from the Top cover ASSY.
(8) Remove the SW key from the Top cover ASSY.
Fig. 3-29
Assembling Note:
• When assembling the Top cover ASSY and the Top cover base, check that the Claws of
the Top cover base is inserted into the positioning holes of the Top cover ASSY.
Hook
SW key
Hook
Claw
Hooks
Taptite bind B M4x12
Ribs
Top cover ASSY
Top cover base
7a
7b
Claw