3-52
Confidential
(5) Remove the FG spring regist from the Motor drive sub ASSY and the Conductive
bearing 5.
(6) Remove the Conductive bearing 5 from the Pin of the Main frame L ASSY, and turn it to
the direction of the arrow 5a until the releasing position, and pull out the Conductive
bearing 5 from the Registration roller shaft 2.
(7) Pull out the Registration roller shaft 2.
Fig. 3-51
Motor drive sub ASSY
FG spring regist
Conductive bearing 5
Registration roller shaft 2
Pin
5a
To Next Page
Loading...
