What to do if my Brother All in One Printer displays 'Out of Memory'?
If your Brother All in One Printer’s memory is full during fax sending or copying: Press Start to send or copy the scanned pages, or press Stop/Exit and wait for other operations to finish. You can also clear faxes from memory by printing them, then turn off Fax Storage. If a print operation is in process, reduce the print resolution or clear faxes from memory.
What to do if my Brother All in One Printer displays 'BT Call Sign On (U.K. only)'?
If your Brother All in One Printer displays 'BT Call Sign On (U.K. only)', it means BT Call Sign is set to On, preventing you from changing the Receive Mode from Manual. Set BT Call Sign to Off to resolve this.
What does 'Fuser Error' mean on my Brother All in One Printer and how to resolve it?
If your Brother All in One Printer displays 'Fuser Error', it means the temperature of the fuser unit did not rise to the specified temperature within the specified time. Turn the power off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on.
What to do if cover is open on Brother All in One Printer DCP-7065DN?
If your Brother All in One Printer DCP-7065DN displays 'Cover is Open', the ADF cover is not completely closed. Close the ADF cover of the machine.
What does init unable XX mean on Brother All in One Printer?
If your Brother All in One Printer displays 'Init Unable XX', the machine has a mechanical problem. Disconnect the machine from the power for several minutes and then reconnect it.
What to do if my Brother All in One Printer says 'Cover is Open'?
If your Brother All in One Printer displays 'Cover is Open', it means the front cover, ADF cover, or fuser cover is not completely closed. Ensure all covers are securely closed. If loading a document, close the ADF cover and press Stop/Exit. Also, check for any paper jammed in the back of the machine; remove it, then close the fuser cover and press Start.
Why does my Brother All in One Printer say 'Cartridge Error'?
A 'Cartridge Error' message on your Brother All in One Printer indicates that the toner cartridge is not installed correctly. To resolve this, pull out the drum unit, remove the toner cartridge, and then re-install the toner cartridge into the drum unit.
What to do if Brother All in One Printer shows 'Disconnected'?
If your Brother All in One Printer displays 'Disconnected', it means the other person or their fax machine stopped the call. Try sending or receiving again.
What does 'Size mismatch' mean on my Brother All in One Printer and how to fix it?
If your Brother All in One Printer displays 'Size mismatch', it means the paper in the tray is not the correct size. Load an appropriate size of paper in the tray and reset the “Paper Size”.
What does 'Limit Exceeded' mean on my Brother All in One Printer and how to resolve it?
If your Brother All in One Printer displays 'Limit Exceeded', it means the Page Limit set in Secure Function Lock 2.0 for your ID has been reached. Contact your administrator to check your Secure Function Lock Settings.
General| Maximum duty cycle | 1600 pages per month |
|---|---|
| Number of print cartridges | - |
| Page description languages | GDI |
| Color | No |
| N-up printing | 2, 4, 9, 16, 25 |
| Duplex printing | Yes |
| Print technology | Laser |
| Resolution color | 2400 x 600 DPI |
| Duplex printing mode | Manual |
| Time to first page (black, normal) | 10 s |
| Print speed (black, normal quality, A4/US Letter) | 20 ppm |
| Noise level (idle) | 31 dB |
| Maximum internal memory | - MB |
| Sound pressure level (printing) | 53 dB |
| Custom media width | 76.2 - 216 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Thick paper, Thin paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Executive (184 x 267mm), Letter (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Package depth | 454 mm |
| Package width | 475 mm |
| Package height | 331 mm |
| Package weight | 8000 g |
| Paper input type | Paper tray |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Product color | Gray |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2 |
| Windows operating systems supported | Windows 2000 Professional, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
| Power consumption (off) | 0.8 W |
| Power consumption (standby) | 62 W |
| Power consumption (printing) | 421 W |
| Energy Star Typical Electricity Consumption (TEC) | 0.913 kWh/week |
Weight and Dimensions| Depth | 360 mm |
|---|---|
| Width | 368 mm |
| Height | 183 mm |
To Next Page