Brother HL-2132 User Manual (English)

Questions and Answers:

R
Ryan RomeroSep 2, 2025
How to fix 'Print Overrun' error on Brother HL-2132 Printer?
- A
  Adriana DiazSep 3, 2025
  If your Brother printer shows a 'PRINT OVERRUN' error, you can press the Go button to print the remaining data in the printer's memory. Alternatively, cancel the print job to delete the remaining data. If the error persists, try reducing the complexity of your document or lowering the print resolution. For HL-2250DN / HL-2270DW models, you can also adjust the following settings in the Windows driver: Graphics, TrueType mode, and Use Printer TrueType Fonts, experimenting to find the best combination for your document. Access these settings by choosing the Basic tab, selecting Manual in Print Settings, and then clicking Manual Settings.
H
Holly CookSep 2, 2025
What to do if my Brother HL-2132 Printer says 'JAM TRAY 1 JAM INSIDE JAM REAR JAM DUPLEX 1'?
- R
  Rodney CurtisSep 2, 2025
  If your Brother printer is showing a 'JAM TRAY 1 JAM INSIDE JAM REAR JAM DUPLEX 1' error, this indicates a paper jam in one of those areas. You should clear the jammed paper from the area indicated.
B
Beverly StevensSep 2, 2025
Why does my Brother Printer say 'No Paper T1'?
- J
  Jesus FoleySep 2, 2025
  If your Brother printer displays a 'No Paper T1' error, it could be due to several reasons. The paper tray might be empty or not correctly installed; if it’s empty, add a new stack of paper and press Go. Even if there is paper, ensure it is straight and not curled—straighten if necessary. Try removing the paper, turning the stack over, and placing it back in the tray. Reduce the amount of paper in the tray. Also, verify that the paper meets Brother’s recommended specifications and that you've loaded the same size paper selected in the driver settings. If the problem persists, the paper pick-up roller may be dirty and needs cleaning.
D
Donna AlvarezSep 2, 2025
What does 'Toner Ended' mean on my Brother All in One Printer and how to resolve it?
- N
  Nathan FarleySep 2, 2025
  The 'Toner Ended' message on your Brother All in One Printer means it is time to replace the toner cartridge. Replace the toner cartridge with a new one to resolve this.
A
Ashley GonzalezSep 1, 2025
Why does my Brother All in One Printer say 'No Toner'?
- M
  mmullenSep 1, 2025
  If your Brother All in One Printer displays 'No Toner', it means the toner cartridge is not installed correctly. Pull out the drum unit, remove the toner cartridge, and then re-install it into the drum unit.
F
frank26Sep 1, 2025
What does 'Replace Drum' mean on my Brother All in One Printer and how to solve it?
- G
  Gary VelasquezSep 1, 2025
  The 'Replace Drum' message on your Brother All in One Printer indicates that it is time to replace the drum unit. Replace the drum unit to resolve this issue.
C
Cameron MackSep 1, 2025
How to fix 'Drum Error' on Brother All in One Printer?
- P
  Pedro WhiteSep 1, 2025
  If your Brother All in One Printer displays 'Drum Error', it indicates that the corona wire on the drum unit needs to be cleaned. Clean the corona wire on the drum unit to resolve this issue.
M
Michael AtkinsonAug 31, 2025
What does 'Replace Toner' mean on my Brother All in One Printer and how to fix it?
- R
  Rodney GainesSep 1, 2025
  The 'Replace Toner' message on your Brother All in One Printer means the machine will stop printing until you replace the toner cartridge. If the Toner setting is set to Stop, replace the toner cartridge with a new, original Brother toner cartridge to reset the Replace Toner mode. If the Toner setting is set to Continue, the machine will continue printing until the LCD shows Toner Ended.
N
Nathaniel JuarezAug 31, 2025
How to resolve 'Toner Low' message on Brother All in One Printer?
- M
  Makayla LeonAug 31, 2025
  If your Brother All in One Printer displays 'Toner Low', it means the toner is running low. It is recommended to purchase a new toner cartridge before you receive a 'Replace Toner' message.
G
Gina RiveraAug 31, 2025
How to fix 'No Paper' error on my Brother All in One Printer?
- H
  Howard FrankAug 31, 2025
  If your Brother All in One Printer shows a 'No Paper' error, it means the printer is out of paper or the paper is not loaded correctly. Refill the paper tray and press Start. Alternatively, remove the paper and load it again, then press Start. If the problem persists, the paper pick-up roller may need cleaning.

Brother HL-2132 Specifications

General

Maximum duty cycle	1600 pages per month
Number of print cartridges	-
Page description languages	GDI
Color	No
N-up printing	2, 4, 9, 16, 25
Duplex printing	Yes
Print technology	Laser
Resolution color	2400 x 600 DPI
Duplex printing mode	Manual
Time to first page (black, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Noise level (idle)	31 dB
Maximum internal memory	- MB
Sound pressure level (printing)	53 dB
Custom media width	76.2 - 216 mm
Custom media length	116 - 406.4 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Thick paper, Thin paper
Paper tray media weight	60 - 105 g/m²
Non-ISO print media sizes	Executive (184 x 267mm), Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Package depth	454 mm
Package width	475 mm
Package height	331 mm
Package weight	8000 g
Paper input type	Paper tray
Total input capacity	250 sheets
Total output capacity	100 sheets
Product color	Gray
Mac operating systems supported	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard
Server operating systems supported	Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2
Windows operating systems supported	Windows 2000 Professional, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Power consumption (off)	0.8 W
Power consumption (standby)	62 W
Power consumption (printing)	421 W
Energy Star Typical Electricity Consumption (TEC)	0.913 kWh/week