Brother HL-2140 - Macintosh; For USB Interface Cable Users

Installing the Printer Driver
18
STEP 2
Macintosh
®
Macintosh
®
USB
3 For USB interface cable users
Connecting the printer to your Macintosh
®
and
installing the driver
1 Connect the USB interface cable to your
Macintosh
®
, and then connect it to the printer.
Improper Setup
DO NOT connect the printer to a USB port on a
keyboard or a non-powered USB hub.
2 Make sure the printer power switch is on.
3 Turn on your Macintosh
®
. Put the supplied CD-
ROM into your CD-ROM drive.
4 Double-click the HL2100 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
5 Click Install Printer Driver on the menu
screen.
6 Click USB cable users and follow the
on-screen instructions. Then, restart your
Macintosh
®
.
For HL-2140 users:
For HL-2150N users:
For Mac OS
®
X 10.2.4 to 10.2.8 users:
Go to step 9.
For Mac OS
®
X 10.3 or greater users:
Go to step 7.
7 The Brother software will search for the Brother
printer. During this time the following screen
will appear.