Installing the Printer Driver
16
STEP 2
Windows
®
Windows
®
Wired
Network
2
For wired network interface cable users
For Peer-to-Peer network printer users
1 Router
2 Network printer
Note
• If you are going to connect the printer to your
network, we recommend that you contact your
system administrator prior to installation or see the
Network User’s Guide on the CD-ROM.
• If you are using Personal Firewall software (e.g.
Windows Firewall), disable it. Once you are sure
that you can print, restart your Personal Firewall
software.
Connecting the printer to your network and
installing the driver
1 Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
2 Make sure the printer power switch is on.
3 Turn on your computer. (You must be logged
on with Administrator rights.)
4 Put the supplied CD-ROM into your CD-ROM
drive. The opening screen will appear
automatically.
Choose your printer model and the language.
Note
If the opening screen does not appear, use
Windows
®
Explorer to run the start.exe program
from the root folder of the Brother CD-ROM.
5 Click Install Printer Driver on the menu
screen.
Note
Choose the Install Printer Driver icon for your
region.
6 Click Network cable users.
TCP/IP
TCP/IP
Windows
R
Macintosh
R
2
1
To Next Page
Loading...
