Brother HL-2270DW - Printing the Printer Settings Page

Control panel setup
27
5
Printing the Printer Settings Page 5
Note
Node name: Node name appears on the Printer Settings Page. The default node name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
The Printer Settings Page prints a report listing all the current printer settings including the network print
server print server settings.
You can print the Printer Settings Page using Go of the machine.
a Make sure that the front cover is closed and the power cord is plugged in.
b Turn on the machine and wait until the machine is in the Ready state.
c Press Go three times within 2 seconds. The machine will print the current Printer Settings Page.
Note
If the IP Address on the Printer Settings Page shows 0.0.0.0, wait for one minute and try again.