To Next PageTo Next Page
How to resolve a 'Drum Error' on a Brother All in One Printer?
A 'Drum Error' on your Brother All in One Printer indicates that the corona wire on the drum unit needs to be cleaned. Clean the corona wire on the drum unit.
Why is Duplex Disabled on my Brother All in One Printer?
If duplex is disabled on your Brother All in One Printer, it could be because the duplex tray is removed or not properly installed. Carefully put the duplex tray into the machine until it clicks into place. Also, it can happen if the back of the machine is not closed completely. Close the back cover of the machine.
What to do when my Brother All in One Printer says 'Toner Ended'?
When your Brother All in One Printer displays 'Toner Ended', it means it's time to replace the toner cartridge with a new one.
What does 'Toner Low' mean on my Brother All in One Printer?
The 'Toner Low' message on your Brother All in One Printer indicates that you will need to replace the toner cartridge soon. It's a good idea to buy a new toner cartridge before you get a 'Replace Toner' message.
What does 'Replace Toner' mean on my Brother All in One Printer?
The 'Replace Toner' message on your Brother All in One Printer means the machine will stop printing until you replace the toner cartridge. If you have set the Toner setting to Stop, replace the toner cartridge with a new and unused genuine Brother toner cartridge. This will reset the Replace Toner mode.
Why does my Brother All in One Printer say 'Replace Drum'?
The 'Replace Drum' message on your Brother All in One Printer indicates that it's time to replace the drum unit. Also, this message can appear if the drum unit counter was not reset when a new drum was installed. In this case, reset the drum unit counter.
Why is my Brother HL-2270DW Printer showing a paper size error?
If your Brother printer is displaying a paper size error, it could be due to: * The registration front actuator catching. Correct its position. * The main PCB might be faulty and need replacement.
Why is my Brother HL-2270DW double feeding paper?
If your Brother printer is double feeding paper, it's likely due to a failure of the paper feeding roller. Replacing the paper feeding kit should resolve this.
Why does my Brother HL-2270DW only print on one side when duplex printing?
If your Brother printer is only printing on one side of the paper when duplex printing, consider these potential causes: * Check the harness connection of the paper eject sensor PCB assembly and reconnect it if necessary. * The duplex tray might be faulty and need replacement. * The back cover sensor might be failing, requiring replacement of the paper eject sensor PCB assembly. * The main PCB might also be the cause, requiring replacement. * Damaged DX gears could also be the issue, requiring replacement of the main frame L assembly.
Why does Brother Printer produce curl in the paper?
If the paper is curling after printing with your Brother printer, the fuser unit might be failing and needs to be replaced.
General| Color | No |
|---|---|
| N-up printing | 2, 4, 9, 16, 25 |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Economical printing | Yes |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 27 ppm |
| Maximum internal memory | - MB |
| Sound power level (standby) | 31 dB |
| Sound pressure level (printing) | 53 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Total number of input trays | 1 |
| Maximum duty cycle | - pages per month |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper, Transparencies |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Wi-Fi standards | 802.11b, 802.11g |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA-PSK, WPA-TKIP, WPA2-PSK |
| Sustainability certificates | ENERGY STAR |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 65 W |
| Power consumption (printing) | 495 W |
| Power consumption (PowerSave) | 0.9 W |
| Operating temperature (T-T) | 10 - 32.5 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Package weight | 8300 g |
| Standard interfaces | Ethernet, USB 2.0, Wireless LAN |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
| Server operating systems supported | Windows 2000 Advanced Server, Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Windows operating systems supported | Windows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
Weight and Dimensions| Dimensions (WxDxH) | 368 x 360 x 183 mm |
|---|
