Brother HL-2270DW - Install the Printer Driver

7
Macintosh
USB
Windows
®
USB
Macintosh
For USB Interface Cable Users for Macintosh
6
Before you install
a Make sure your machine is plugged in and your
Macintosh is switched ON. You must be logged
on with Administrator rights.
b Connect the USB cable to the USB connector
on the machine marked with the symbol,
and then connect the cable to your Macintosh.
c Make sure the machine power switch is on.
7
Install the printer driver
a Put the installation CD-ROM into your
CD-ROM drive.
b Double-click the Start Here OSX icon. Follow
the on-screen instructions.
c Follow the on-screen instructions until this
screen appears. Choose your machine from
the list, and then click OK.
d When this screen appears, click Next.
IMPORTANT
• For the latest drivers and information on the
Mac OS X you are using, visit
http://solutions.brother.com/.
• For Mac OS X 10.4.0 to 10.4.10 users,
upgrade to Mac OS X 10.4.11 - 10.6.x.
IMPORTANT
• DO NOT connect the printer to a USB port on
a keyboard or a non-powered USB hub.
• Connect the printer directly to your
computer.
Note
It may take a few minutes for installation to
complete.
Note
When the Brother Support screen appears,
make your selection and follow the on-screen
instructions.
Finish
The installation is now
complete.