8
Windows
®
Wired Network
For Wired Network Cable Users for Windows
®
(For Peer-to-Peer network users)
6
Before you install
a Router
b Machine
a Make sure that your computer is ON and you
are logged on with Administrator rights.
b Remove the protective cap from the LAN
connector.
c Connect the network cable to the LAN
connector marked with a symbol and then
connect it to a free port on your hub.
d Make sure the machine power switch is on.
If you are going to connect the machine to your
network, we recommend that you contact your
system administrator prior to installation.
• If there are any programs running, close
them.
• The screens may differ depending on your
operating system.
To Next Page
Loading...
